GSWB

CHAPTER 8 CLI Operations

(4)See also save

save config

restore config

(5)Examples

•Clears the configuration definition

Switch# clear config 0

Are you sure? [y/n]: y

Now perform...

Switch#

(6)Error Messages

•% Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

• Command is already running.

Cause: Execution of one of the following commands is in progress: change, reload, install.

Action: Re-enter the command after the command currently being executed ends.

• Bank cannot be switched.

Cause: Banks cannot be switched.

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and then restart the unit. Alternatively, contact a certified service engineer.

8-164

C122-E003-02EN