GSWB
CHAPTER 8 CLI Operations
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
• Input parameter error.
Cause: An invalid logging level was specified.
Action: Specify the correct logging level.
8.2.22.3 logging host
This command specifies the IP address of the log message (mlog) transfer destination.
The default setting is "0.0.0.0".
If the setting is the default setting, the message log is not transferred to an external device.
(1)Synopsis
•Specifies the IP address of the log transfer destination
logging host
•Resets the IP address of the log transfer destination to the default value (0.0.0.0) no logging host
(2)Options
z
Specifies the IP address of the transfer destination syslog server.
(3)Command mode
Global
(4)See also
logging on
show logging