GSWB
CHAPTER 8 CLI Operations
(4)See also show bridge
show bridge
(5) Examples
Switch# clear bridge
Switch#
(6)Error Messages
•Command is already running.
Cause: One of the following commands is running. show bridge/clear bridge
Action: Reenter the command after the current command exits.
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.