GSWB
CHAPTER 8 CLI Operations
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.2.10.2 wrr-queue cos-map
This command specifies the correspondence between user priorities and the CoS Queue.
The CoS allocated to the input port is used for CoS priority selection in the output port.
(1)Synopsis
•Maps the correspondence between user priorities and the CoS Queue
•Resets the CoS map to the default value no
(2)Options
z<p0> - <p7>
Specifies the transmit CoS Queue corresponding to the user priority (0 to 7). The setting range for the transmit CoS Queue is 0 to 3. Multiple user priorities are delimited by the space character. The default setting is "1 0 0 1 2 2 3 3".
(3)Command mode
Global
(4)See also
switchport priority default
show