GSWB

CHAPTER 8 CLI Operations

(5)Examples

•Sets an IP address statically

Switch(config)# ip host 172.20.128.2 255.255.255.0

Switch(config)#

(6)Error Messages

•% Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

•Internal communication error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

• vlan id doesn’t exist.

Cause: The specified VLAN does not exist.

Action: Specify an existing VLAN.

• invalid host address.

Cause: An invalid IP address was specified.

Action: Specify a valid address.

• ip address is necessary for ip default-gateway.

Cause: Restoring the IP address to the default value was attempted while ip default- gateway was set.

Action: Restore the IP address to default after restoring the ip default-gateway to default.

• ip default-gateway inconsistent with network.

Cause: The ip default-gateway setting is inconsistent with the network setting.

8-44

C122-E003-02EN