GSWB 7.9 Spanning Tree Menu
7.9Spanning Tree Menu
Loops may be formed when a redundant configuration is integrated into a network. The protocol function detects and removes such loops, and the [Spanning Tree] menu is used to configure protocol function settings.
7.9.1Global Setting window
The [Global Setting] window configures spanning tree protocol settings.
Figure 7.45 [Global Setting] window
Table 7.78 Displayed and setting items in the [Global Setting] window
Item | Description |
Spanning Tree Protocol | Specify enable or disable for the spanning tree protocol: |
| • Enable (default): Enables the protocol. |
| • Disable: Disables the protocol. |
|
|
BPDU Filter | Define BPDU filtering: |
| • Enable: Specifies transfer of Bridge Protocol Data Unit (BPDU) |
| frames when STP is disabled. |
| • Disable (default): Disables BPDU filtering on the specified |
| interface. [Disable] is always used when STP is enabled. |
|
|
Bridge Priority | Specify the bridge priority. The lower this value, the higher the |
| bridge priority. |
| Setting range: 0 to 65535 (default: 32768) |
|
|