PSA 5.14 Setup Menu
Figure 5.25 [Watchdog] window
Table 5.34 Displayed and settings items in the [Watchdog] window
Item |
| Description |
Software Watchdog |
|
|
Watchdog | The user can enable or disable SoftWare Watchdog monitoring: | |
| • | Disable: Disable monitoring |
| • | Enable: Enable monitoring |
| The default setting is [Disable]. | |
|
| |
TimeOut | The user can specify a timeout value in seconds, which is used | |
| while the SoftWare Watchdog monitoring is enabled: | |
| Range: 60 to 6000 seconds | |
| This item can be specified only if [Enable] is selected. The default | |
| setting is 3600 seconds. | |
|
| |
Watchdog Action | The user can select from a pulldown list the action to be executed | |
| in the event that control is not returned after a timeout: | |
| • No Action: Execute no action. Except SEL output. | |
| • Reset: Reset the partition | |
| • Power Off: Power off the partition forcibly without the normal | |
|
| OS termination process (shutdown) |
| • Power Cycle: Forcibly power off the partition and power it on | |
|
| again |
| • INIT: Issue an INIT interrupt to the partition | |
| You can only specify this item when you select [Enable]. The | |
| default is [No Action]. | |
|
|
|