GSWB 8.2 Configuration Definition Commands
8.2.1.5restore config
This command overwrites the configuration definition file with the contents in the work area.
Note: This command cannot be executed during execution of the clear config, clear ramdisk, restore config, save, save config, or tftp command.
(1) Synopsis
restore config {config0 config1}
(2) Options
z{config0 config1}
-config0: Overwrites config0 with the contents in the work area.
-config1: Overwrites config1 with the contents in the work area.
(3)Command mode
enabled exec
(4)See also clear config
clear ramdisk
save
save config
tftp
(5)Examples
•Overwrites config0 with the contents in the work area
Switch# restore config config0
Are you sure? [y/n]:y
Now perform...
Switch#