MMB
CHAPTER 3
Item | Description |
Power Fault Reaction | The user can specify the action taken in the event of lost |
| redundancy, and this setting is displayed: |
| • continue: Keeps servers operating continuously when |
| redundancy is lost. |
| • shutdown: Shuts down the servers when redundancy is lost. |
| The default value is [continue]. |
|
|
Shutdown Delay after | The user can specify the grace period from UPS detection of a |
UPS detected AC | power failure until the start of an OS shutdown. |
Failure | If power recovery is completed within this time, the OS shutdown |
| does not start. |
| The setting range is 0 to 9999 seconds. |
| The default setting is 5 seconds. |
|
|
Power Linkage Mode | If this check box is checked, when all partitions are shut down, the |
| power to the cabinet and the GSWB is turned off at the same time. |
| If the check box is unchecked, the cabinet and the GSWB remain |
| on when all partitions are shut down. By default, the check box is |
| checked (the cabinet and the GSWB are switched off in |
| synchronization with the shutdown of all partitions). |
|
|
Altitude | The user can specify the altitude of the |
| machine installation location. |
| • Altitude <= 1500 m |
| • 1500 m < Altitude <= 2000 m |
| • 2000 m < Altitude <= 2500 m |
| • 2500 m < Altitude |
| The default setting is Altitude <= 1500 meters. |
|
|
Mirror Mode (current | Indicates the mirror mode status that is currently in effect on the |
status) | system. |
| • Enabled: The system is in mirror mode. |
| • Disabled: The system is not in mirror mode. |
| The default status is [Enabled]. |
|
|
Mirror Mode (setting) | The user can specify whether to enable or disable mirror mode for |
| the system. |
| • Enable (Mirror Mode) |
| • Disable (Non Mirror Mode) |
| Additionally, the user must power off all partitions to validate a |
| change to this setting. The change is not reflected in the system |
| until the |
| Furthermore, [System Mirror (Extended Mirror Mode)] must be |
| specified for the mirror mode of all partitions. For details, see the |
| section about the [Mode] window. |
|
|