GSWB
CHAPTER 8 CLI Operations
(5)Examples
•Specifies that the host be set with the host address 192.168.0.120, SNMP version 2c, community name "XXXYYYZZZ", and
Switch(config)#
• Uses the show command to check settings
Switch(config)# show
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
• Input parameter error.
Cause: An invalid IP address or community string was specified.
Action: Specify the correct IP address and community string.
• Input parameter duplicate error.
Cause: Registering a host already registered was attempted.
Action: Check the hosts already registered.