GSWB
CHAPTER 8 CLI Operations
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
• igmp vlan is invalid.
Cause: IGMP snooping for the specified VLAN is not enabled.
Action: Reenter the command after enabling IGMP snooping for the specified VLAN.
• Input parameter duplicate error.
Cause: Duplicated registration was attempted.
Action: Check the entries already registered.
• % Not implement daughter card.
Cause: TenGigabitEthernet was specified for the unit where no TenGigabitEthernet daughter card was implemented.
Action: Check the device configuration.
• Entry isn't existed.
Cause: The specified entry is not registered.
Action: Check the entered entry.
•It is necessary to review specified VLAN and port.
Cause: The VLAN and port definitions do not match.
Action: Review the VLAN and port definitions.