GSWB 8.3 Operation Commands
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.3.6.4clear bridge
This command deletes the learning table contents.
Only dynamic entries can be deleted; static entries cannot be deleted. To register or delete static entries, execute the mac
When this command has been entered, it cannot be interrupted by the [Ctrl]+[C] keys.
The command cannot be executed during execution of any of the following commands:
zshow bridge
zThis command
Any change in the learning contents by hardware is reflected in the learning table contents after about 5 to 10 seconds.
(1) Synopsis
clear bridge
(2)Options
None
(3)Command mode enabled exec