MMB 3.2 System Menu

Item

Description

Location LED

Location LED status

 

 

The three light statuses are as follows:

 

 

• On: Currently lit

 

 

• Off: Currently not lit

 

 

• Blink: Currently blinking

 

 

The LED can be turned on, turned off, or set to blink by clicking a

 

 

radio button.

 

 

Chipsets

 

GDX#0 to GDX#1

GDX status:

 

 

• OK: Operating normally

 

 

• Warning: Operating but requires maintenance (contact a

 

 

certified service engineer).

 

 

• Failed: Failure

 

 

DC-to-DC Converters

 

DDC Redundancy

Indicates the redundancy statuses of DC-to-DC converters 00 and

 

 

01.

 

 

• Redundant: The converters are redundant.

 

 

• [Non-redundant: Sufficient Resources]: The converters have

 

 

lost redundancy, but are sufficient for system operation.

 

 

• [Non-redundant: Insufficient Resources]: The converters have

 

 

lost redundancy and are insufficient for system operation.

 

 

DDC#00 to DDC#01

DC-to-DC converter status:

 

 

• OK: Operating normally

 

 

• Not present: Not installed

 

 

• Failed: Failure

 

 

• Configuration error: Configuration error

 

 

Voltage

 

Sensor

Voltage sensor type

Voltage

Current voltage reading

Threshold

Warning

Lower and upper limits of the warning-level voltage. If no limit is

 

(Low/High)

set, "-" is displayed.

 

 

 

 

Critical

Lower and upper limits of the critical-level voltage. If no limit is

 

(Low/High)

set, "-" is displayed.

 

 

 

 

Table 3.34 Button in the [XDI#x] window

 

 

 

Button

 

Description

Status Clear

 

Clears the error status of the XDI and attempts to use the XDI at

 

 

the next reboot.

 

 

Reference: You can clear the XDI error status and specify that the

 

 

XDI be reused at the next reboot. If an error is detected

 

 

again during reboot, the XDI will be placed again in an

 

 

error status.

 

 

 

C122-E003-02EN

3-55