GSWB 8.2 Configuration Definition Commands
(5)Examples
•Creates a channel group with channel number 5 specified
Switch(config)# interface
• Deletes the channel group whose channel number is 5
Switch(config)# no interface
Switch(config)#
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.2.11.2 channel-group
This command adds and deletes physical links for a channel group:
zThe maximum number of ports that can be registered in a channel group is 8.
zDifferent types of interfaces cannot be registered in the same channel group.
zRegistered channel groups cannot be changed. To change a channel group, delete the channel group definition, and create a new channel group.
zThe port registered first in a channel group becomes the master port, which inherits communication attributes and settings (Speed, duplex,