MMB
CHAPTER 3
Table 3.28 Buttons in the [SB#x Status Clear] window
Button | Description |
Apply | To clear the status of a component, select the component, and click |
| the [Apply] button. |
|
|
Cancel | Click the [Cancel] button to not change information and not clear |
| the status of a component. |
|
|
(1) Menu operation
[System] → [SB] → [SB#x] → [Status Clear]
(2)GUI operation
1Make a selection for component status clearing as follows:
•Click [Clear All Status] to clear the statuses of all components.
•To clear the statuses of components individually, click [Clear Specified Status] and click [Status Clear] on the component on which you want to clear the error status.
•Click [Clear Status of common parts] to clear the statuses of common parts.
2Click the [Apply] button.
The statuses of the specified components are then cleared. Use of these components is attempted at reboot.
3.2.12IO_Unit menu
The [IO_Unit] menu consists of the following menus for the respective IO_Units:
z[IOU#0] to [IOU#7]
The menu for IO_Units that have not been mounted are not displayed.
This section describes these menus collectively as [IO_Unit#x] because they share the same window format and operating methods.