GSWB
CHAPTER 8 CLI Operations
Also, inquiries are sent to an NTP server at the following times:
zWhen the command is entered
zWhen the device is turned on and started
zWhen the device is restarted by the reload command
(1)Synopsis
•Specifies the interval of inquiries to an NTP server
ntp status <interval> <timeout>
•Resets the interval of inquiries to an NTP server to the default value no ntp status
(2)Options
z<interval>
Specifies the interval of inquiries to an NTP server.
Specify the interval in a range of 1 to 24 hours. The default setting is one hour.
z<timeout>
Specifies the timeout time of an inquiry to the server.
Specify a time in a range of 1 to 15 seconds. The default setting is 3 seconds.
(3)Command mode
Global
(4)See also ntp servershow ntp
(5)Example
•Sets the interval of inquiries to an NTP server
Switch(config)# ntp status 12 5
Switch(config)#