|
| MMB |
|
| 3.2 System Menu |
|
|
|
|
|
|
| Item | Description |
| Number of events | Specify the number of events to be displayed for the log. The |
| to display | default setting is 100. |
|
| The denominator indicates the number of events stored in the log. |
|
|
|
| Table 3.7 Buttons in the [System Event Log Filtering Condition] window | |
|
|
|
| Button | Description |
| Apply | Specify conditions such as [Severity], [Partition], and [Unit], and |
|
| click the [Apply] button. The specified filtering conditions are |
|
| then set, and the [System Event Log] window is displayed again. |
|
| The window displays events that satisfy the filtering conditions. |
|
|
|
| Cancel | Click the [Cancel] button to return to the [System Event Log] |
|
| window. The events displayed in the window remain the same. |
|
|
|
| Default Setting | Click the [Default Setting] button to reset all items in this window |
|
| to their default values. |
|
|
|
(1) Menu operation
[System] → [System Event Log] → [Filter] button at the bottom of the window
(2)GUI operation
•To display the [System Event Log] window in specified filtering conditions:
1Specify conditions and click the [Apply] button.
The [System Event Log] window reappears. It displays a list of messages limited to those which fulfill the specified conditions. If no message that fulfills the conditions exists, the window displays its title and a message stating that there is no log to be displayed.
•To return to the [System Event Log] window:
1Click the [Cancel] button. The specified conditions are canceled and the [System Event Log] window reappears.
•To return the selected values to the default values:
1Click the [Default Setting] button. The conditions selected for all parameters are cleared and the parameters revert to their default values.