GSWB 8.2 Configuration Definition Commands

8.2.14.4 duplex

This command specifies a duplex mode:

zNo setting can be made for IO_Units 00 to 71 and TenGigabitEthernet 1/1 to 1/2.

zNo setting can be made for a port-channel.

zIf [auto] is specified by the speed command, duplex mode setting by this command is disabled because Auto Negotiation determines the duplex mode.

zIf the setting is changed to the fixed setting (10/100) by the speed command, the setting by this command is enabled.

(1)Synopsis

•Sets a duplex mode

duplex {full half}

•Resets the duplex mode to the default value (full) no duplex

(2)Options

z{full half}

-full (default): Specifies the full-duplex mode.

-half: Specifies the half-duplex mode.

(3)Command mode

Interface

(4)See also

None

(5)Examples

•Sets GigabitEther0/1 to full-duplex mode.

Switch(config)# interface GigabitEthernet 0/1 Switch(config-if)# show speed

100

Switch(config-if)# duplex full Switch(config-if)#

C122-E003-02EN

8-105