|
|
| MMB |
|
|
| 3.5 Network Configuration Menu |
|
|
|
|
|
|
|
|
| Item |
| Description |
| Auth |
| Specify the authentication level. |
|
|
| • noauth: Disables authentication and encryption based on a |
|
|
| password (enables authentication based on a user name). |
|
|
| • auth: Enables authentication based on a password but disables |
|
|
| encryption based on a password. |
|
|
| • priv: Enables authentication and encryption based on a |
|
|
| password. |
|
|
|
|
| Auth Type |
| • md5: Selects MD5 as the hash function for |
|
|
| encryption. |
|
|
| • sha: Selects SHA as the hash function for |
|
|
| encryption. |
|
|
|
|
| Auth passphras |
| Displays the packet encryption keyword used at the time of |
|
|
| |
|
|
|
|
| Priv passphrase |
| Displays the packet encryption keyword used at the time of |
|
|
| |
|
|
|
|
|
| Table 3.97 Buttons in the [SNMP Trap] window | |
|
|
|
|
| Button |
| Description |
| Apply |
| Specify a community or user name, trap destination, etc., and click |
|
|
| the [Apply] button to set the specified values. |
|
|
|
|
| Cancel |
| Click the [Cancel] button to revert to the original settings for the |
|
|
| community or user name, trap destination, etc. |
|
|
|
|
| Test Trap |
| Click the [Test Trap] button to send a test trap to the current trap |
|
|
| destination. |
|
|
|
|
(1) Menu operation
[Network Configuration] → [SNMP Configuration] → [SNMP Trap]
(2)GUI operation
•Specifying SNMP trap information
1Enter a community or user name, trap destination IP address, SNMP version, and authentication level, and click the [Apply] button.
The entered values are then set.
•Sending a test trap
1Click the [Test Trap] button. Values are cleared from the settings. A test trap is sent.