GSWB
CHAPTER 7
Table 7.54 Displayed and setting items in the [Remote Access] window
Item |
| Description |
Protocol | Protocol | |
IP Address | IP address | |
Subnet Mask | Subnet mask | |
Delete | To delete a setting, check its check box. | |
Add the New Entry |
|
|
Protocol | Specify a protocol: | |
| • All: Specifies all protocols. | |
| • | telnet: Specifies telnet. |
| • | ssh: Specifies ssh. |
|
| |
IP Address | Specify an IP address: | |
| • All: Specifies all IP addresses. | |
| • Host: Specify host addresses to be permitted. | |
| • Network: Specify network addresses to be permitted. | |
| • If you select Host or Network, specify the IP or network | |
|
| addresses that are permitted for remote connection, in the range |
|
| from 0 to 255. |
|
| |
Subnet Mask | If a specific host IP address is specified in [IP address], no subnet | |
| mask need be specified. A subnet mask is required for a specific | |
| network. Octet range: 0 to 255 | |
|
|
|
Table 7.55 Buttons in the [Remote Access] window
Button | Description |
Help | Displays the Help window. |
Apply | Sets the specified values. |
Cancel | Closes the window without saving the change. |
(1) Menu operation
[Switch] → [GSWB#x] → [Management] → [Remote Access]
(2)GUI operation
•Setting
1Select the protocol that is responsible for permitting access and the IP address or network address specification method.
2If you select [Host] for [IP Address], specify the host address in the address field. If you select [Network], specify the network address and subnet mask.
3Click the [Apply] button.