GSWB
CHAPTER 8 CLI Operations
(4)See also install
tftp
restore config
save config
(5)Examples
•Deletes files in the work area
Switch# clear ramdisk
Are you sure [y/n]:y
Now perform...
Switch#
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
• Command is already running.
Cause: One of the following commands is running.
install / clear ramdisk / restore config / save config / tftp
Action: Reenter the command after the current command exits.