GSWB 8.3 Operation Commands

8.3.2.4reload

This command restarts the whole unit.

This command cannot be executed during execution of the change, reload, or install command.

(1)Synopsis

•Restarts the whole unit after diagnostics processing if specified

reload [non-idiag idiag]

(2) Options

z[non-idiag idiag] (optional)

If non-idiag is specified, the device will be restarted without diagnosis. If idiag is specified, the device will be restarted after all diagnostic processing is performed. By default, the device will be restarted without diagnosis.

(3)Command mode

enabled exec

(4)See also change

install

(5)Examples

•Restarts without diagnostics

Switch# reload

Are you sure? [y/n]:y

Now perform...

• Restarts after diagnostics processing is completed

Switch# reload idiag

Are you sure? [y/n]:y

Now perform...

C122-E003-02EN

8-169