MMB 3.3 Partition Menu
3.3.4Console Redirection Switch window
The [Console Redirection Switch] window can be used to connect serial output from a partition to the COM port of the home IO_Unit or redirect it to the MMB.
Figure 3.35 [Console Redirection Switch] window
Table 3.58 Displayed and setting items in the [Console Redirection Switch]
window
Item |
| Description |
# | Partition identification number. | |
Partition Name | Name assigned to a partition. | |
Status | Partition status: | |
| • | OK: Operating normally |
| • | Degraded: Component failure (The faulty component can be |
|
| isolated to continue operation.) |
| • | Warning: Warning status (A problem will possibly occur.) |
| • | Failed: Failure |
|
| |
Power Status | Partition power status: | |
| • | On: Powered on |
| • | Standby: Standby mode |
|
| |
Connect to | For serial output from the OS, select either a connection to the | |
| IO_Unit COM port or redirection to a remote client via the MMB: | |
| • | COM: Output to the COM port |
| • | MMB: Redirected to a remote client via the MMB |
| The default setting is [COM]. | |
|
|
|