GSWB 8.2 Configuration Definition Commands
(5)Examples
•Specifies "hash for the destination MAC address" as the load balancing method of channel group 1
Switch(config)# interface
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.2.12IGMP snooping functions
8.2.12.1 ip igmp snooping
This command enables or disables IGMP snooping for the whole device.
If IGMP snooping is disabled for the whole device, IGMP snooping is disabled in all existing VLAN interfaces.
(1)Synopsis
•Enables IGMP snooping
ip igmp snooping