MMB
CHAPTER 3
3.5.6.3SNMP v3 Configuration window
An engine ID unique to SNMP v3 as well as user information can be specified in the [SNMP v3 Configuration] window.
Up to 16 SNMP v3 users can be registered. Registered users are listed in this window.
Note: If the engine ID or IP address is changed, setup for users who have been registered for SNMP v3 access must be completed again, starting from the beginning. The SNMP daemon must be restarted to validate registered users. Therefore, when the [Apply] button in the window is clicked, the SNMP service stops temporarily.
Figure 3.58 [SNMP v3 Configuration] window
Table 3.98 Displayed and setting items in the [SNMP v3 Configuration]
window
Item | Description |
Engine ID | Specify an engine ID. |
User |
|
User Name | To register a user, select the check box of the user. |
Auth Type | Select an authentication type: |
| • MD5: Uses MD5 as a hash function for password encryption |
| • SHA: Uses SHA as a hash function for password encryption |
|
|
authpassphrase | Keyword used for packet encryption if |
| authentication (no encryption) is enabled |
|
|