MMB 4.2 Setting Commands
4.2Setting Commands
The following commands are used to specify information:
zfactory_default
zclear access_control
zclear ssh_key
zpower off
zpower on
zdownload ssh_key
zset date
zset timezone
zset gateway
zset http
zset http_port
zset https
zset https_port
zset ssh
zset ssh_port
zset telnet
zset telnet_port
zset ip
zset hostname
zset remcs
This section describes how to use these commands.
4.2.1factory_default
This command resets MMB configuration information to the default values.
Executing the command deletes:
-All account information
-Network configuration information
-Logging information
Therefore, user and network configurations must be set up again after the command is executed.
zPrivilege: Users with the Admin privilege or CE privilege