GSWB

CHAPTER 8 CLI Operations

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

8.3.8.6show logging line

This command displays the stored line log contents.

(1) Synopsis

show logging line [<interface-id>] [tail <number>]

(2) Options

z<interface-id>

Displays the line log of the specified interface. The following interfaces can be specified:

-IOU 0 0-7 1

-GigabitEthernet0/1-8

-TenGigabitEthernet1/1-2

-port 1-35

If this parameter is omitted, the line log of all interfaces are displayed.

ztail: Displays the specified number of last log items.

- number: Specifies the number of log items to be displayed (1 to 1023).

(3)Command mode

enabled exec

(4) See also

clear logging line

8-254

C122-E003-02EN