GSWB 8.3 Operation Commands
Specify the IP address basically in the form of xxx.xxx.xxx.xxx. xxx is a decimal number ranging from 0 to 255.
zcyclic (optional)
Displays the reply results after an ICMP (Echo Request) packet is transmitted at an interval of 1 second. If the cyclic option is specified, statistical information is displayed when all information has been gathered. If this option is specified, the icmp_seq sequence number, which is the transmission/reception count, is displayed. When the sequence number exceeds 65535, it is reset to 0. If this option is omitted, the command will send one ICMP packet.
zlength <length> (optional)
ICMP data size. The ICMP header is not included. Specify a value ranging from 0 to 4500 bytes. If this option is omitted, the ICMP data size is 56 bytes. If 7 bytes or less is specified, the timer value is not displayed. If the specified length is in a range of 0 to 7, the time value indicating the response time is not displayed.
zcount<counter> (optional)
Number of times that packets are transmitted. Specify a value ranging from 0 to 65535. If this option is omitted or 0 is specified, an infinite value is assumed with transmission terminated when the [Ctrl]+[C] keys are pressed.
ztimeout <seconds> (optional)
Reply monitoring time. Specify a value ranging from 0 to 600 seconds. If 0 is specified, an infinite value is assumed with a timeout occurring when the [Ctrl]+[C] keys are pressed or an ICMP (Echo Reply) packet is received. The default value is 20 seconds.
(3)Command Mode user exec
enabled exec
(4)See also
None