GSWB 8.3 Operation Commands
(3)Command mode enabled exec
(4)See also
show logging line
(5)Examples
•Deletes all the stored line log contents
Switch# clear logging line
Are you sure? [y/n]:y
Now perform...
Switch#
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.