GSWB 8.2 Configuration Definition Commands

Switch(config)# mac address-table aging-time 100

Switch(config)#

• Disables aging

Switch(config)# mac address-table aging-time 0

Switch(config)#

• Resets the aging time to the default value

Switch(config)# no mac address-table aging-time

Switch(config)#

(6)Error Messages

•% Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

•Internal communication error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

• Input parameter error.

Cause: An invalid parameter was specified.

Action: Specify the correct parameter.

8.2.7.2mac address-table static

This command adds and deletes MAC address table static addresses:

zMAC addresses registered statically cannot be deleted using "clear bridge." They can be deleted using "no mac address-table static."

C122-E003-02EN

8-49