GSWB 7.4 System Menu
7.4.7Active Image Change window
The [Active Image Change] window changes firmware and the configuration definition file. Settings that are enabled in [Current Setting] are also enabled in the initial display of this window.
The following firmware can be specified in the window:
z[Offline Firmware]: Software for hardware initialization, hardware initial diagnosis, and online firmware loading and startup
z[Online Firmware]: General name of different types of software groups used for GSWB operations
The GSWB must be restarted to reflect any changes. A message prompting restart of the GSWB is displayed when the [Apply] button is clicked.
Figure 7.11 [Active Image Change] window
Table 7.28 Displayed and setting items in the [Active Image Change] window
Item |
| Description |
Configuration File | Specify the configuration definition file that is used at GSWB | |
| startup: | |
| • | config0 |
| • | config1 |
|
| |
Boot Firmware | Specify the offline firmware bank that is used at GSWB startup: | |
| • | bank0 |
| • | bank1 |
|
|
|