GSWB 8.2 Configuration Definition Commands

• Set count over.

Cause: Registration exceeding the maximum 8 units was attempted.

Action: Check the number of registered entries.

• Entry isn’t existed.

Cause: Deletion of an unregistered host was attempted.

Action: Check the hosts already registered.

8.2.17.6 snmp-server enable traps

This command enables trap transmission to the specified host and specifies the transmission notification type:

zThe only port number used for trap transmission is 162.

zUp to eight trap notification destinations can be registered.

zInformation transmission (inform) is not supported.

zDES is used for encrypting packets.

zTrap notification destinations with the same IP address but different SNMP versions can be registered simultaneously.

(1)Synopsis

•Enables trap transmission to the specified host and specifies the transmission notification type

snmp-server enable traps < host address > { version { 1 <community> 2c <community> 3 <user> { noauth auth {md5 sha} <password> priv {md5 sha} <password> <passphrase>}

• Deletes the specified host

no snmp-server enable traps < host address > version { 1 2c 3 }

C122-E003-02EN

8-123