GSWB
CHAPTER 8 CLI Operations
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.3.4.5show ip
This command displays the IP host information and status and default gateway information.
The same information is displayed by the following commands:
zshow ip host (See Section 8.3.4.7, "show ip host.")
zshow ip
zshow ip socket (See Section 8.3.4.8, "show ip socket.")
zshow arp (See Section 8.3.4.4, "show arp.")
(1)Synopsis
show ip
(2)Options
None
(3)Command mode user exec
enabled exec