GSWB 8.2 Configuration Definition Commands
Switch(config)# interface GigabitEthernet 0/2
• Sets the port priority for the
Switch(config)# interface
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.2.8.7spanning-tree cost
This command specifies interface path costs. In the initial state, the path costs are automatically calculated based on data rates. The path costs are automatically recalculated for any change to the data rates.
For each port, each bridge calculates the total (root path cost) from the designated costs of received Hello messages and the costs for the specified number of ports. Then, the port with the lowest total is selected as the root port.
When making this setting for a