GSWB 8.2 Configuration Definition Commands

•Resets a device name to the default value no hostname

(2)Options

z<hostname>: Specifies a host name (up to 63 alphanumeric characters including the hyphen (-), underscore (_), slash (/), #, and *). However, the first character cannot be a special symbol (hyphen (-), underscore (_), slash (/), #, or *). The default device name is "switch". The following special symbols cannot be specified: (!"$%&'()=~^\ `@[{ ;+:}] ,<>?).

(3)Command mode

Global

(4)See also

None

(5)Examples

Switch(config)# hostname gswb gswb(config)#

(6)Error Messages

•% Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

•Internal communication error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

C122-E003-02EN

8-47