MMB
CHAPTER 3
(2)GUI operation
1Enter a subnet mask, IP address, etc. for network interface information, and click the [Apply] button to set the specified values.
The specified IP address, subnet mask, etc. are then set.
3.5.3Management LAN Port Configuration window
The [Management LAN Port Configuration] window can be used to specify the speed and duplex mode of each MMB port and set up a VLAN between the LAN port of the partition connected to the management LAN and the MMB LAN port.
Remarks: If the Speed/Duplex setting of an MMB LAN port is not "AUTO," use a cross cable for the interconnection between the MMB LAN port and the switching hub.
Figure 3.53 [Management LAN Port Configuration] window