Basics
2.6 Basic Operations in
2.6Basic Operations in Web-UI Windows
• Access procedure
The procedure for accessing the MMB from the
1Start a Web browser.
JavaScript must be enabled in the browser because the MMB uses JavaScript.
2Enter one of the following addresses: http:// nodename:adminport (HTTP)
https:// nodename:adminport (HTTP with a security function)
For "nodename," specify the virtual IP address, physical IP address, or corresponding FQDN of the active MMB.
For "adminport," specify the port number assigned to the MMB management port (The default value is 8081 for Standard or 432 for SSL.)
3Enter the following user account and password, and then click the [Login] button.
Remarks:
| If the MMB is starting for the first time or its settings have not been changed, | |
| the following default user account and password are in effect and you are | |
| asked to change the default password. | |
• | User name ID | : Administrator |
• | Password | : Password set by the Fujitsu certified service engineer at |
|
| the time of device setup. |
The procedure for displaying the desired
1Select the appropriate menu item from the navigation bar in the information frame to display the corresponding menu in the submenu frame.
The submenu frame then displays the menu.
2Select the window from the submenu displayed in the submenu frame. The content display frame then displays the window.
3Confirm and specify information in the window.
4To return to the next higher layer of the menu, click the ← (back) button on the toolbar.
The content display frame displays the window as the next higher layer of the menu.
The step for exiting from the
5Click [Logout] at the right end of the navigation bar in the information frame. This results in logout from the