GSWB 8.3 Operation Commands
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.3.2.3install
This command installs the offline or online program to an area that is not currently used for startup.
This command cannot be executed during execution of the clear ramdisk, install, show system information, tftp, change, or reload command.
The command cannot be interrupted by the [Ctrl]+[C] keys.
The command cannot be executed during execution of any of the following commands: clear ramdisk, install, show system information, tftp.
Do not turn off power during installation.
(1)Synopsis
•Installs the offline or online program to an area that is not currently used for startup
install {offline online}
(2) Options
z{offline online}
-offline: Installs an offline program.
-online: Installs an online program.
(3)Command mode
enabled exec