|
|
|
| EFI |
|
|
|
| 10.4 EFI Setup Menu |
|
|
|
|
|
|
|
|
|
|
| Item | Parameters | Default | Description |
| Data Width | 16 | 16 | Specifies the data transfer |
|
| 8 |
| width. |
|
|
|
|
|
| Scan ID | Yes | Yes | Specifies whether to scan the |
|
| No |
| ID selected at the time of |
|
|
|
| startup. |
|
|
|
|
|
| Scan LUNs >0 | Yes | Yes | Specifies whether to scan |
|
| No |
| LUNs greater than 0. |
|
|
|
|
|
| Disconnect | Off | Off | Specifies whether to permit |
|
| On |
| SCSI operation disconnection. |
|
|
|
|
|
| SCSI Timeout | 10 | Specifies the SCSI operation | |
|
|
|
| timeout value. |
|
|
|
|
|
| Queue Tags | On | On | Specifies whether to permit use |
|
| Off |
| of queue tags. |
|
|
|
|
|
| Format |
|
| Formats the selected device at |
|
|
|
| low level. (This item is only |
|
|
|
| available when the device is a |
|
|
|
| hard disk drive.) |
|
|
|
|
|
| Verify |
|
| Verifies every sector of the |
|
|
|
| selected device and, if any |
|
|
|
| defective sector is found, |
|
|
|
| performs reassignment. (This |
|
|
|
| item is only available when the |
|
|
|
| device is a hard disk drive.) |
|
|
|
|
|
| Restore Defaults |
|
| Pressing the [Enter] key resets |
|
|
|
| the items to their defaults. |
|
|
|
|
|
3Change the settings.
1)Select the desired item by moving the cursor up, down, left or right.
2)Change the parameter.
3)Press the [Enter] key.
4)Press the [Esc] key to exit from the tool.
4Save the settings.
If you press the [Esc] key in the [Adapter Properties] or [Device Properties] window to exit from the tool, the following window appears: