Sharp R-68ST manual Before Operation, Setting the Clock

R-68ST_EN.qxd 7/27/07 12:20 PM Page 4

BEFORE OPERATION

Plug in the oven.

1.The oven display will flash:

2.Press the STOP button, the display will show: x1

Using the STOP button

Use the STOP button to:

1.Erase a mistake during programming.

2.Stop the oven temporarily during cooking.

3.Cancel a programme during cooking, touch twice.

3.To set the clock, see below.

4.Heat the oven without food. (See page GB-7, Note b).

SETTINGTHE CLOCK

There are two setting modes: 12 hour clock and 24 hour clock.

1.To set the 12 hour clock, hold the MICROWAVE POWER LEVEL button down for 3 seconds. "12 H" will appear in the display.

2.To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once more after Step 1, in the example below "24 H" will appear in the display.

To set the clock, follow the example below.

Example:

x1 and hold for 3 secs.

To set the 24 hour clock to 23:35.
1. Choose the clock function.	Choose the 24 hour	2. Set the hours. Rotate the TIMER/WEIGHT
(12 hour clock).	clock.	knob until the correct hour is displayed (23).

x1

x1 and hold for 3 seconds

3. Press the MICROWAVE	4. Set the minutes. Rotate the
POWER LEVEL button to	TIMER/WEIGHT knob until
change from hours to	the correct minute is
minutes.	displayed (35).

5.Press the MICROWAVE POWER LEVEL button to start the clock.

x1

NOTES:

1.You can rotate the TIMER/WEIGHT knob clockwise or counter-clockwise.

2.Press the STOP button if you make a mistake during programming.

3.If the electrical power supply to your microwave oven is interrupted, the display will intermittently

x1

show "88:88" after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.

4.When you want to reset the time of day, follow the above example again.

GB-4