1166 OSPF Commands
Restart Helper Status........................ Not helping
Restart Helper Exit Reason................... Not attempted
Field Description
Field Description
Interface The name of the interface on which the adjacency is formed.
Neighbor IP Address
The IPv4 address on the neighbor's interface used to form the
adjacency.
Interface Index The SNMP interface index.
Area Id The OSPF area in which the adjacency is formed.
Options
The options advertised by the neighbor.
Router Priority The router priority advertised by the neighbor.
Dead timer The number of seconds until the dead timer expires.
Up Time How long this adjacency has been in FULL state.
State The current state of the adjacency.
Events Incremented for the following events:
• A DD is received from the neighbor with an MTU mismatch.
• The neighbor sent an ACK for an LSA not on the nei ghbor's
retransmit list.
• The state of the adjacency changed.
Retransmission
Queue Length
The number of LSAs on the neighbor's retransmit queue
waiting for the neighbor to acknowledge.

Restart Helper

Status

One of two values:

• Helping — This router is acting as a helpful neighbor to this
neighbor. A helpful neighbor does not report an adjacency
change during graceful restart, but continues to advertise the
restarting router as a FULL adjacency. A helpful neighbor
continues to forward data packets to the restarting router,
trusting that the restarting router's forwarding table is
maintained during the restart.

• Not Helping — This router is not a helpful neig hbor at

this time.

2CSPC4.XCT-SWUM2XX1.book Page 1166 Monday, October 3, 2011 11:05 AM