Agilent Technologies 5250 user manual PFS FF is sent to the printer. Normally this PFS

APPENDIX B — SCS/DCA COMMAND SUMMARY		Page B-5
Command:	Form Feed (FF)
Format:	0C
Printers:	3812, 4214, 5219, 5224, 5225, 5256
Action:	Moves the current print position to the top line of the
	next logical page. The print position is restored to the
	current indent level, or to the left margin if there is no
	indent.
	Most IBM host system print spoolers use the Form Feed
	character to delimit and count pages. For this reason,
	only Form Feed should be used to move to a new page.
	Vertical movement commands other than Form Feed
	should not be used to move to a new page.
IBMEMUL:	The PFS FF> is sent to the printer. Normally this PFS
	sends a Form Feed character to the printer.
	Support for source paper drawer selection on some target
	printers requires that the PFS FF> be empty. See Page
	Presentation Media (PPM) for more information.
275EMUL:	FF is sent to printer.
Command:	Carriage Return (CR)
Format:	0D
Printers:	3812, 4214, 5219, 5224, 5225, 5256
Action:	Returns the current print position to the first position on
	the current line.
	On the 3812 and 5219, the current print position is
	returned to the current indent level as set by Indent Tab
	(IT) and/or Set Indent Level (SIL). If there is no indent
	level set, the current print position is returned to the left
	margin.
IBMEMUL:	Same as the 3812 and 5219.
275EMUL:	CR is sent to printer.