AGILE 5250 OPTIMA User’s Guide and ReferencePage 5-6
PFSTEST! Report
This report will print a test sample of most of the OPTIMA PFSs. PFSs are
specific to the output port and the printer it is using. Print to the device for
which the PFSs are being tested (e.g., to test the PFSs for the printer
connected to the PARALLEL OUT PRINTER port, select PO under
OPTIMA: PRINT: TO=).
For each PFS, see that it has been implemented properly by looking at the
effect on the text that follows the PFS name. For example, to test the PFS
10 CPI>, the report will print This line of text is in 10
CPI. using the appropriate font as defined in the PFS.
The following is a sample report:
-----------------------------------------------------------------------------
AGILE 5250 OPTIMA V6.00 COPYRIGHT (C) 8/2/93 BY AGILE. ALL RIGHTS RESERVED.
PFS Test Page
-----------------------------------------------------------------------------
This is a test of the PFSs for the printer printing this report.
Each of the following print enhancements are made with the
indicated PFS. Not all printers support all PFS functions.
5 CPI>
5 Characters Per Inch.
10 CPI>
This text should be 10 Characters Per Inch.
PS CPI>
This text should be proportionally spaced.
WWWWWWWWWW
iiiiiiiiii
12 CPI>
This should be 12 Characters Per Inch
.
15 CPI>
This should be 15 Characters Per Inch.
16 CPI>
This should be 16 Characters Per Inch.
Now Back to 10 CPI.
BOLD ON>
This text should be bold.
BOLDOFF>
This text should not be bold.
UNDL ON>
This text should be underlined.
UNDLOFF>
This text should not be underlined.
EMPH ON>
This text should be emphasized.
EMPHOFF>
This text should not be emphasized.
SUBS ON> Baseline. Subscripted. SUBSOFF>
SUPS ON> Baseline. Superscripted. SUPSOFF>
-----------------------------------------------------------------------------