CHAPTER 4 — PROGRAMMABLE FUNCTION STRINGS Page 4-13
If the printer is capable of printing any font at any pitch (CPI), then this PFS should set the pitch for the current font. If a specific font is needed to achieve 15 CPI, then this PFS should be defined to select that font.
If the RES CPI= option (under FMTINFO: for the output port) is set to
P 16CPI
Print 16 characters per inch in portrait orientation. This PFS is sent to the printer when the 5250 OPTIMA’s page orientation algorithm has selected a portrait orientation, and when the System has requested a font with a pitch of greater than 15 but less than or equal to 16 CPI (using either an SCS Set Character Density command or an SCS Set FID through GFID command).
If the printer is capable of printing any font at any pitch (CPI), then this PFS should set the pitch for the current font. If a specific font is needed to achieve 16 CPI, then this PFS should be defined to select that font.
If the RES CPI= option (under FMTINFO: for the output port) is set to
P 17CPI
Print 17 characters per inch in portrait orientation. This PFS is sent to the printer when the 5250 OPTIMA’s page orientation algorithm has selected a portrait orientation, and when the System has requested a font with a pitch of greater than 16 CPI (using either an SCS Set Character Density command or an SCS Set FID through GFID command).
If the printer is capable of printing any font at any pitch (CPI), then this PFS should set the pitch for the current font. If a specific font is needed to achieve 17 CPI, then this PFS should be defined to select that font.
If the RES CPI= option (under FMTINFO: for the output port) is set to
