APPENDIX B — SCS/DCA COMMAND SUMMARY | Page | |
|
|
|
Command: | Set Printer Setup (SPSU) |
|
Format: | 2B D2 nn 4C xx pf xx si |
|
Printers: | 3812, 5219 |
|
Action: | Specifies both the paper feed technique and the print | |
| setup to be used. |
|
| The pf parameter specifies the paper feed technique. | |
| Valid values are 00h (no change), 01h (manual feed), | |
| 02h (tractor feed) and 03h (automatic cut sheet feed). | |
| The si parameter is a string of up to 60 bytes that is used | |
| to indicate the printer setup to the operator. On the 5219, | |
| the first two bytes of this string are interpreted as decimal | |
| digits and displayed on the front panel LED. |
|
| This command is ignored by the 3812. |
|
IBMEMUL: | Same as the 5219. |
|
| The OPTIMA uses the fc parameter to determine which | |
| forms control PFS to send to the target printer. |
|
| PORTMAN> or LANDMAN> (fc=01h), PORTTRC> or | |
| LANDTRC> (fc=02h), or PORTCUT> or LANDCUT> | |
| (fc=03h) is sent to the printer if the fc parameter is | |
| changed. |
|
| The OPTIMA discards the si parameter. |
|
275EMUL: | No operation. |
|
