Page 1-16

AGILE 5250 OPTIMA User’s Guide and Reference

Connecting a Second Alternate Host via Serial

If using both of the 5250 OPTIMA’s serial ports as alternate host ports, connect the second device through SERIAL I/O PORT 1. This port has a DB-9, PC/AT-compatible connector. Connecting SERIAL I/O PORT 1 to an alternate host device requires a null modem cable, available as an option from AGILE.

To connect SERIAL I/O PORT 1 to an alternate host device:

1.Insert the device end of the serial alternate host cable into the connector on the rear of the alternate host device.

2.Tighten the thumbscrews until the connection is firm, but do not overtighten.

PARALLEL OUT

PARALLEL IN

SERIAL I/O

SERIAL I/O

PRINTER

ALT HOST

PORT 1

PORT 0

PC COMPATIBLE

PC COMPATIBLE

PC-AT COMPATIBLE

DCE

117 VAC 0.5A 50/60 Hz 35W FUSE: 250v 0.5A

SLO-BLO

CAUTION: FOR CONTINUED

PROTECTION AGAINST FIRE,

REPLACE ONLY WITH SAME

TYPE AND RATING OF FUSE.

LR

MADE IN USA

 

 

TWINAX

®

 

This equipment complies with the requirements

 

in Part 15 of FCC Rules for a Class A computing

 

 

device. Operation of this equipment in a

 

 

residential area may cause unacceptable

 

Y

interference to radio and TV reception requiring

 

the operator to take whatever steps are

 

 

necessary to correct the interference.

3.Insert the DB-9 end of the AGILE alternate host cable into the SERIAL I/O PORT 1 connector on the rear panel of the OPTIMA.

4.Tighten the thumbscrews until the connection is firm, but do not overtighten.

Page 41
Image 41
Agilent Technologies 5250 user manual Connecting a Second Alternate Host via Serial