AGILE 5250 OPTIMA User’s Guide and ReferencePage 1-6
5250 OPTIMA Rear Panel
The rear panel of the OPTIMA provides an on/off switch, a NEMA power
cord outlet, a DB-15 port for connecting a twinax adapter (TWINAX), a
Centronics DB-25 parallel output port (PARALLEL OUT PRINTER), a
DB-25 parallel input port (PARALLEL IN ALT HOST), a DB-9 serial I/O
port (SERIAL I/O PORT 1) and a DB-25 serial I/O port (SERIAL I/O
PORT 0).
PARALLEL OUT
PRINTER PARALLEL IN
ALT HOST
PC COMPATIBLE PC COMPATIBLE PC-AT COMPATIBLE DCE
TWINAX
FUSE: 250v 0.5A
SLO-BLO
MADE IN USA
CAUTION: FOR CONTINUED
PROTECTION AGAINST FIRE,
REPLACE ONLY WITH SAME
TYPE AND RATING OF FUSE.
LR 69521 E.D.P. EQUIPMENT Y
47T8
This equipment complies with the requirements
in Part 15 of FCC Rules for a Class A computing
device. Operation of this equipment in a
residential area may cause unacceptable
interference to radio and TV reception requiring
the operator to take whatever steps are
necessary to correct the interference.
SERIAL I/O
PORT 1 SERIAL I/O
PORT 0
117 VAC 0.5A 50/60 Hz 35W
LISTED
UL
®®
The PARALLEL OUT PRINTER port is a PC-compatible DB-25
Centronics port that is dedicated to output to a printer or another
parallel-attached output device.
The PARALLEL IN ALT HOST port is a PC-compatible DB-25
port dedicated to input from a PC or another parallel-attached
alternate host input device.
SERIAL I/O PORT 1 is a PC/AT-compatible DB-9 port that can be
used for serial interfacing to either a printer or an alternate host.
SERIAL I/O PORT 0 is a DCE-standard DB-25 port that can be
used for serial interfacing to either a printer or an alternate host.
The TWINAX port is used to attach an intelligent twinax T
adapter for attachment to a twinax host. The adapter will
automatically terminate or cable-through.
The power cord attaches to the standard NEMA power cord
receptacle.