AGILE 5250 OPTIMA User’s Guide and ReferencePage D-10
Use the arrow keys to move the cursor to the appropriate choice, and press
ENTER. The Xerox Special Options screen will return. To return to the
OPTEDIT main screen, press F10 or Esc.
PFS Suppression
This option is useful for both XDPM and XPPM data streams, and it
allows the user to control how the OPTIMA will suppress PFSs for the
data it receives on the twinax address.
To define this option, use the arrow keys to move the cursor on the Xerox
Special Options screen to the words PFS Suppression= (Suppress PFSs
in XES jobs is the default), and press ENTER. The following choices will
be displayed:
Dont Suppress PFSs
Auto Suppress PFSs in XES
Always Suppress PFSs
Suppress all but Bold/Und
Auto, but not Bold/Und
Dont Suppress PFSs tells the OPTIMA not to suppress PFSs for the data
stream received on the twinax address. This option gives the host full
control over document formatting.
Auto Suppress in XES will cause the OPTIMA to suppress all PFSs
except the CR>, LF> and FF> PFSs during XDPM print jobs. The XDPM
job is delimited by one of the job start commands  <UDK>+P,
<UDK>+Q, <UDK>+M or <UDK>+N. The PFS suppression will continue
until the XDPM job end command (<UDK>+X) is received. This option is
useful only in XDPM data streams.
Always Suppress PFSs will cause the OPTIMA to suppress all PFSs for
the data streams received from this twinax address. This allows the data
stream to format the page without conflicts with system formatting
requests. This option is very useful for printing XPPM data streams. If the
twinax address is receiving XPPM data that will be sent to a printer in
XPPM mode, this option should always be selected.
Suppress all but Bold/Und tells the OPTIMA to suppress all PFSs except
BOLD ON>, BOLD OFF>, BSBOLD1>, BSBOLD2>, UNDL ON> and
UNDLOFF>.