DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
979Trunk Group
17
Incoming Destination
Use this field to set the destination for all incoming calls on trunk groups such as
CO, FX, and WATS that must terminate at a single destination. The destination
you enter here is also the default night service destination unless you enter a
different destination in the Night Service field. Appears when the Direction field
is incoming or two-way.
Comm Type
Use this field to define whether the trunk group carries voice, data, or both.
NOTE:
Comm Types of avd, rbavd and data require trunk member ports on a DS1
circuit pack.
Valid entries Usage
blank Leave this field blank if the Trunk Type (in/out) field is not
auto/….
an extension
number Calls go to the extension you enter. You may enter any type of
extension, though typically the extension entered here
identifies a VDN, a voice response unit, or a voice messaging
system. Night service overrides this sett in g when it’s active.
attd Calls go to the attendant and are recorded as Listed Directory
Number (LDN) calls on call detail records.