DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
736IP Trunk Configuration Manager
17
The Quality of Service dialog box contains the following parameters:
Parameter Description
Line Pool ID Allows you to specify an integer between 1 and 999 that identifies a
logical group (pool) of lines. The lines consist of trunk groups that
emulate T1 (robbed-bit) or E1 (common-channel) channels. No
ISDN connections can be placed in the trunk groups that make up
line pools. This line pool is used to handle calls to a p articul ar remote
site.
Highlight a Line Pool ID (number) and c lick on Properties (shows
statistics):
■Idle - do not monitor QoS
■Monitor only - monitor QoS and do not take trunks out of service
■Monitor - PSTN Fallback - monitor QoS and take trunks out of
service if QoS is below thresholds
Remote IP
Address Allows you to specify the IP address of the remote site whose calls
will be handled by this pool.
Lines in Pool Allows you to specify which trunk groups are members of this line
pool.
Continued on next page